SMK Develops Floating Board to Board Connector
Featuring Industry’s Smallest-Class Mounting Area*
SMK Corporation has developed a 0.5mm-pitch board to board connector with floating structure “PB-F2 Series” for automotive devices.
In recent years, in addition to the need for miniaturization, there has been a growing demand for higher transmission speeds and multi-polarization for automotive connectors along with the increasing amount of information handled by automotive devices. To meet the requirements, SMK developed the “PB-F2 Series” under the themes of miniaturization and high-speed transmission.
The new connector achieved the industry’s smallest mounting area* while maintaining high contact reliability with the company’s unique structure, contributing to the downsizing of automotive devices.
Its floating structure absorbs ±0.5ｍｍ gap in the X and Y directions and +0.5mm in the Z direction. Having matched differential impedance of 100Ω, it supports high-speed transmission of up to 6Gbps. Also, it is available both with and without EMI shielding structure.
* In the case of the 120-pin connector, the mounting area is reduced by
about 50% compared with the industry’s conventional products.
Automotive devices such as infotainment systems, display audio,
car navigation equipment, engine control units, etc.
|Published Date||November 21st, 2019|
|Press Release Number||1123CS|
|Product Name||Board to board connector for automotive devices “PB-F2 Series”
Part Number: CPBA4XX-02XX (Receptacle), CPBA5XX-02XXF (Plug)
1) Industry’s smallest-class mounting area.
|Rating||50V AC/DC, 0.5A|
|Contact Resistance||30mΩ maximum|
|Insulation Resistance||100V DC, 100MΩ Minimum|
|Withstanding Voltage||100V AC (1 minute)|
|Operating Temperature Range||-40°C to ＋105°C|
|Mounting Height||Receptacle: 5.7mm, Plug: 7.25mm
(Stack height: 10mm)
|External Dimensions||Receptacle: 33.5mm (W)×6mm (D)×5.7mm (H)
Plug: 33.5mm (W)×6mm (D)×7.25mm (H)
(In the case of 120-pin type)
|Mounting Area||201mm2 (In the case of 120-pin type)|
|Mounting Method||Reflow soldering|
|Operating Life||10 cycles|
|Start Taking Orders From||December 2019|
|Goes Into Mass Production From||April 2020|
|Production Capacity||300,000 units per month|
|Sample Price||500 yen per unit|
|Inquiry||For more information, please contact CS Division.|
- April, 2020 ~
- April, 2019 ~ March, 2019
- April, 2018 ~ March, 2019
- April, 2017 ~ March, 2018
- April, 2016 ~ March, 2017
- April, 2015 ~ March, 2016
- April, 2014 ~ March, 2015
- April, 2013 ~ March, 2014
- April, 2012 ~ March, 2013
- April, 2011 ~ March, 2012
- April, 2010 ~ March, 2011
- April, 2009 ~ March, 2010
- April, 2008 ~ March, 2009
- April, 2007 ~ March, 2008
- April, 2006 ~ March, 2007